Washing silk rugs?

Steve Pendleton · January 16th, 2019, 05:43 PM

I found a small, handmade Chinese silk-on-silk mat in a thrift shop. It's decorative piece in good condition. Chrome dyes, ?1990s?. I've washed many handmade wool rugs. Can I safely wash a silk piece? Technique has been "dust with vibration; long soak in cool water plus Orvis; rinse ten times; de-water with a shop vac; drip dry on a rack with fan for air circulation." Paid $4 for it, doubt that it's valuable or collectable. I normally wash new finds, however, and this is first encounter with all-silk. Other than being especially gentle, what do I do differently?

Steve Pendleton

Marvin Amstey · January 17th, 2019, 08:15 PM

That's basically how we do it in the shop where I work, except we don't use the shop-vac. We use a hand squeegee instead.
Are you sure that it is silk and not mercerized cotton or bamboo silk? In those cases the shop-vac is fine.

Marvin Amstey · January 17th, 2019, 08:30 PM

PS: Don't use the beater bar when vacuuming.

Steve Pendleton · January 18th, 2019, 02:40 AM

Marvin, thanks. Per your suggestions, approach will be to dust by vibration, cold-water soak with Orvis, light agitation, rinse, no squeezing/compression, squeegee with a light touch, de-water with towels instead of shop-vac, air dry with fan circulation. Like washing a wool rug, but gentler mechanical steps.

It's silk. I burned foundation and pile threads. Both smelled like burned hair. Not cotton.

Again, thanks

Steve Pendleton

Marvin Amstey · January 18th, 2019, 02:36 PM

"Dewatering" is easier with a window squeegee on a rod that allows one to stand up instead of using towels on your hands and knees.
Have fun!

Steve Pendleton · January 18th, 2019, 05:31 PM

For durable wool rugs, first squeegee, then shop vac. Consider trying the shop vac thing! It's a wee bit o' work, Laddie, but it will suck gallons out of a squeegeed rug quickly, reducing the risk of color run and the air-dry time. After good wash and rinse, you'd think the water would be clean--but No!--you'll also remove yet-more suspended dirt. Alternatively, commercial wet carpet cleaners typically have a suction feature to de-water vacuum-cleaner style a foot at a time. I haven't tried that, but it should be equivalent, and less work.

Again, thanks

--SRP

Marvin Amstey · January 18th, 2019, 07:20 PM

We've been using a shop vac on wool rugs for decades

Rich Larkin · January 22nd, 2019, 04:56 AM

For a squeegee, I have had good luck with a length (ca. 10-12 inches) of hardwood flooring. Maple is the best, but I have used other woods. Go over the straight, sharp edge with a fine sandpaper. Plane it along the top of the (wet, soapy) pile in the direction of the pile, maintaining steady, controlled pressure. It pushes a lot of dirt-laden water out of the piece while avoiding the tendency of many squeegees to grab at and pull fibers.

I have never tried it on silk.

Steve Pendleton · February 6th, 2019, 07:02 PM

Good outcome! For reference, the method was a day-long, passive soak in cold water and Orvis, light-tough squeegee after rinse, air-dry on a rack open and supporting underneath. No issues. Increases the silky sheen, probably because the squeegee aligned the fibers. Thanks to all!

Steve

Ian Strange · February 12th, 2020, 06:56 PM

I've used the shower on its powerful setting on small wool on wool flatweaves, followed by a quick soak in mild detergent and a final powerful showering until the water runs clear, then dry outdoors over the back of an uptilted garden chair. Works fine.

January 16th, 2019, 05:43 PM	#1
Steve Pendleton Members Join Date: Sep 2008 Posts: 4	Washing silk rugs? I found a small, handmade Chinese silk-on-silk mat in a thrift shop. It's decorative piece in good condition. Chrome dyes, ?1990s?. I've washed many handmade wool rugs. Can I safely wash a silk piece? Technique has been "dust with vibration; long soak in cool water plus Orvis; rinse ten times; de-water with a shop vac; drip dry on a rack with fan for air circulation." Paid $4 for it, doubt that it's valuable or collectable. I normally wash new finds, however, and this is first encounter with all-silk. Other than being especially gentle, what do I do differently? Steve Pendleton

January 18th, 2019, 02:40 AM	#4
Steve Pendleton Members Join Date: Sep 2008 Posts: 4	Thanks Marvin Marvin, thanks. Per your suggestions, approach will be to dust by vibration, cold-water soak with Orvis, light agitation, rinse, no squeezing/compression, squeegee with a light touch, de-water with towels instead of shop-vac, air dry with fan circulation. Like washing a wool rug, but gentler mechanical steps. It's silk. I burned foundation and pile threads. Both smelled like burned hair. Not cotton. Again, thanks Steve Pendleton Last edited by Steve Pendleton; January 18th, 2019 at 05:42 AM.

January 18th, 2019, 05:31 PM	#6
Steve Pendleton Members Join Date: Sep 2008 Posts: 4	Squeegee vs MechaGodzilla For durable wool rugs, first squeegee, then shop vac. Consider trying the shop vac thing! It's a wee bit o' work, Laddie, but it will suck gallons out of a squeegeed rug quickly, reducing the risk of color run and the air-dry time. After good wash and rinse, you'd think the water would be clean--but No!--you'll also remove yet-more suspended dirt. Alternatively, commercial wet carpet cleaners typically have a suction feature to de-water vacuum-cleaner style a foot at a time. I haven't tried that, but it should be equivalent, and less work. Again, thanks --SRP Last edited by Steve Pendleton; January 18th, 2019 at 05:49 PM.

February 6th, 2019, 07:02 PM	#9
Steve Pendleton Members Join Date: Sep 2008 Posts: 4	Good result, memo of method Good outcome! For reference, the method was a day-long, passive soak in cold water and Orvis, light-tough squeegee after rinse, air-dry on a rack open and supporting underneath. No issues. Increases the silky sheen, probably because the squeegee aligned the fibers. Thanks to all! Steve

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 17th, 2019, 08:15 PM	#2
Marvin Amstey Members Join Date: May 2008 Location: Fairport, NY Posts: 38	That's basically how we do it in the shop where I work, except we don't use the shop-vac. We use a hand squeegee instead. Are you sure that it is silk and not mercerized cotton or bamboo silk? In those cases the shop-vac is fine.

January 17th, 2019, 08:30 PM	#3
Marvin Amstey Members Join Date: May 2008 Location: Fairport, NY Posts: 38	PS: Don't use the beater bar when vacuuming.

January 18th, 2019, 02:36 PM	#5
Marvin Amstey Members Join Date: May 2008 Location: Fairport, NY Posts: 38	"Dewatering" is easier with a window squeegee on a rod that allows one to stand up instead of using towels on your hands and knees. Have fun!

January 18th, 2019, 07:20 PM	#7
Marvin Amstey Members Join Date: May 2008 Location: Fairport, NY Posts: 38	We've been using a shop vac on wool rugs for decades

January 22nd, 2019, 04:56 AM	#8
Rich Larkin Members Join Date: Jun 2008 Location: Massachusetts Posts: 130	For a squeegee, I have had good luck with a length (ca. 10-12 inches) of hardwood flooring. Maple is the best, but I have used other woods. Go over the straight, sharp edge with a fine sandpaper. Plane it along the top of the (wet, soapy) pile in the direction of the pile, maintaining steady, controlled pressure. It pushes a lot of dirt-laden water out of the piece while avoiding the tendency of many squeegees to grab at and pull fibers. I have never tried it on silk.

February 12th, 2020, 06:56 PM	#10
Ian Strange Members Join Date: Jun 2019 Location: London, England Posts: 3	I've used the shower on its powerful setting on small wool on wool flatweaves, followed by a quick soak in mild detergent and a final powerful showering until the water runs clear, then dry outdoors over the back of an uptilted garden chair. Works fine.